Does anyone know where this car is now ?

 - John Edwards 
 - Been out of touch for some time

Hi chaps
Any one know a supplier for the metal part of the sliding roof ?
This forms a horse shoe shape.
Regards
           Tim
PS This is the actual part which slides open.

Opinions as to their originality? While the rear panels have the holes for the screws used to retain the sidescreen pins - they are missing from those on the door?
https://www.ebay.co.uk/itm/193855855216?ul_noapp=true

Attached Files

  Chummytrim2.jpg (Size: 352.12 KB / Downloads: 299)

My apologies for wandering from A7 affairs, but just in case anyone is looking for a milling machine, of the less-expensive Taiwanese-built type, this is the best of the bunch - and appears to be in little-used condition. Correction - the machine was built in Korea.
https://www.ebay.co.uk/itm/133641398262?ul_noapp=true

Had a phone call query yesterday from an owner with a spare rear axle where there was a gap between the pinion angular contact bearing housing and the torque tube. I've not come across this problem, are these special narrow bearings?

Does anyone have a 30 degree John Barlow manifold for sale?

Hi All,

I've received an email from a friend regarding a friend of his who owned an AE Tourer. His friend had the car in the 1970s and would like to find out what happened to the car. Does anyone know of this car? It may have been shipped to the US at some point.

Any help is appreciated.

Erich in Mukilteo

Attached Files

  3896_001.pdf (Size: 86.85 KB / Downloads: 87)

I've been playing with a little post-AI colouring enhancements - and we now have a green prototype and some other more minor improvements. The location of the original photograph is known (it was donated by the Grocer, Mr Hands) and the "owner of the knowledge" hopes he'll be able to get a higher resolution copy.

Attached Files

  A71922-green2.jpg (Size: 475.6 KB / Downloads: 318)

Hello All,

I know that there are no newly cast replacement Girling drums available but I have been thinking if there are any other 178mm diameter brake drums that could be altered to fit?  What are the various dimensions of a standard Girling drum, i.e. apart from the internal diameter. I think the important ones are centre hole diameter, external diameter, stud spacing, braking suface width and offset.

David

sad news for those clibming the walls, wanting to get to an autojumble.

just gone through my emails, only to find my stall update for spring beaulieu.

ITS CANCELLED.

they hope with the problems of covid and vaccine rollout, we will be back to some normality for the international beaulieu september 4 - 5 th.

my personal opinion, is NO HOPE.

tony