14-06-2021, 08:28 PM
(This post was last modified: 14-06-2021, 08:31 PM by Hedd_Jones.)
It seems the cause of my tire wear was severe toe in, due likely to no more adjustment in the track rod. Now cured.
I set it on Saturday.
With a cranked trackrod, and both ends being the same pitch, adjustment is by whole turn only.
I now have a gnats dick over 1/8 measured at what would be outer edge of the tyre using mk1 eyeball and a tape measure. That'll do me. 1 turn either was was a mile out. I didnt measure the pitch, what is it? 14?
I set it using some nice straight planks sat on a sleeper resting against the tyres. A few pencil marks as datums and it was easy as.
I set it on Saturday.
With a cranked trackrod, and both ends being the same pitch, adjustment is by whole turn only.
I now have a gnats dick over 1/8 measured at what would be outer edge of the tyre using mk1 eyeball and a tape measure. That'll do me. 1 turn either was was a mile out. I didnt measure the pitch, what is it? 14?
I set it using some nice straight planks sat on a sleeper resting against the tyres. A few pencil marks as datums and it was easy as.