28-10-2020, 09:04 PM
(This post was last modified: 28-10-2020, 09:05 PM by andrew34ruby.)
Regarding polarity, decide which you prefer and set it up that way. All you have to do is connect the battery the way round that you want, then flick a wire from the non-earth side of the battery onto the F (field) connection on the dynamo. The ammeter might read the wrong way around, so swap the wires on it if you want.
6 volt or 12 volt is nearly as easy. fitting of a battery of the voltage you prefer is the main thing. Then somehow preventing too much current flowing through the dynamo field windings.
6 volt or 12 volt is nearly as easy. fitting of a battery of the voltage you prefer is the main thing. Then somehow preventing too much current flowing through the dynamo field windings.