28-11-2023, 07:34 PM
(28-11-2023, 06:45 PM)andrew34ruby Wrote:Hi Andrew(28-11-2023, 05:21 PM)Howard Wright Wrote: Hi Jeff
https://www.fsw.uk.com/category/flametec...razing-kit
One of these!
I started with a smaller set that used disposable oxygen bottles but it was costing a fortune in oxygen.
Cheers
Howard
That looks interesting, though after about 30 years with oxy-acetylene and then 20 years without, I don't really miss it now.
Why do they sell it for brazing? Will it weld thin sheet?
I’ve managed test welds on 1mm steel sheet but my skill level is not high enough to produce decent welds. For anything structural I use stick or MIG welding. I’ve used the oxy Mapp to braze aluminium with special rods.
Cheers
Howard