02-09-2023, 07:07 PM
Hi
I too am fitting a Hadley crank into a pressure fed Nippy Crankcase.
I am using a late flywheel which I have just lightened and fitted a new ring gear onto.
Flywheel and crank currently in my lathe being lapped together so it can all go and be balanced with the clutch cover assembly.
I too am fitting a Hadley crank into a pressure fed Nippy Crankcase.
I am using a late flywheel which I have just lightened and fitted a new ring gear onto.
Flywheel and crank currently in my lathe being lapped together so it can all go and be balanced with the clutch cover assembly.