The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 28 Vote(s) - 3.32 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What have you done today with your Austin Seven
I've been busy with Davids old car, plus a job or two on the grey saloon

Put some miles on TH since its engine transplant. Now done nearly 30miles. Goes well enough. It is a little smokey from the valve chest, but hey ho. At least its running and on the road while its proper engine is in bits. A breather pipe has already solved that problem. Will drop the oil in it next time I get it warm.

[Image: 273974112_10225004754560613_298347645280...e=620D2165]

also fixed the puncture. There was an inch and a half gash in the tube!. Had to make my own patch

[Image: 273885737_10224999601671794_876295061772...e=620C9A40]

David, a question for you, ever since ive known the car, the bloody pedals have fallen off whilst driving. The cones are brazed to the pad, and have a rubber pad, so they eventually come undone and fall off. This is a thorough PITA

[Image: 273894369_10224999600631768_479730369244...e=620C5478]

My grey car is pukka Austin and only very occasionally have I had this problem. However on the chummy I not long sold the pads were secured with nuts. That seemed to be the permanent cure. So have done this similar and sodded off the pedal rubbers to boot.

[Image: 273890307_10224999599071729_272757482733...e=620D20C2]

I noticed a drop of coolant on the head of the grey car the other day, looks like the joint under the water manifold was kaput, so took it off, cut a new one. refitted with a new fibre washer etc. Also noticed the hose wasn't the best so invested in a new one. Now back together and full of antifreeze again. So all 3 cars back on the road.

[Image: 273676554_10224988079543748_657546449612...e=620D3A9F]

[Image: 273679529_10224988080223765_463223265349...e=620C8F74]

[Image: 273851296_10225003530090002_409561946697...e=620D844C]

Next job is to take the chummy to bits!
Reply


Messages In This Thread
Peak District well dressing - by Tony Griffiths - 31-08-2019, 05:00 PM
Genuine old and imitation new - by Tony Griffiths - 01-07-2021, 03:37 PM
RE: What have you done today with your Austin Seven - by Hedd_Jones - 12-02-2022, 08:47 PM
Crankcase machining - by Chris Garner - 29-08-2023, 08:59 PM
Massed ballon landing and A7 - by Tony Griffiths - 03-09-2023, 08:27 PM
Popping and not pulling well? - by Biddlecombe - 10-04-2019, 03:37 PM

Forum Jump:


Users browsing this thread: 121 Guest(s)