06-03-2019, 11:32 AM
(This post was last modified: 06-03-2019, 11:33 AM by Reckless Rat.)
Over the past few days I've had to put A7 tinkering onto the back burner because I've been doing some remedials to the pool. Both skimmers were leaking and have to be replaced which meant quite a lot of digging. The first stage is almost complete but it's raining down here in Rekkersland which has put the mokkers on working outside. As there is always something that needs doing on an Austin, I decided to fit the new rear damper springs I'd ordered from David Cochrane. It's amazing how much the original springs have compressed over the years - new on the left, old on the right:
All back together and working again.
Nothing wrong with the MG, just charging the battery.
All back together and working again.
Nothing wrong with the MG, just charging the battery.