26-02-2019, 12:19 AM
I made new brake and clutch pedals. I had to extend them out a bit so I could reach the clutch without needing the seat so far forward I couldn't get into it. Since I am not using rubbers I made the pads bigger. Plus that was the diameter of my hole saw!
Still need to do the throttle pedal but first I need to do the exhaust header so I can work out exactly how the throttle linkage needs to work.
Simon
Still need to do the throttle pedal but first I need to do the exhaust header so I can work out exactly how the throttle linkage needs to work.
Simon