25-01-2019, 07:55 PM
(This post was last modified: 25-01-2019, 07:58 PM by Dave Wortley.)
Simon, I overdid the removal of metal of dynamo housing 2 years ago on my RN. There was still backlash all the way round but obviously not enough as 150 metres from home there was an awful din from the front of the engine. I freewheeled down the hill back home and found half a dozen cam/crank gear teeth in the bottom of the timg case. Fortunately no pthe damage
Sorry, should say "timing " and "other" Fat finger syndrome.
Sorry, should say "timing " and "other" Fat finger syndrome.