The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.27 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
GE Cup Boulogne
#1
I've just come across this rather nice picture on a French cyclecar forum which looks like the prototype Cup recently discussed here. Has anyone seen it before? Presumably the start of the race.


Attached Files Thumbnail(s)
   
Reply
#2
Thanks for posting this Tom but, yes!
See post by Duncan titled ATF on 27/12/18 for the ensuing discussion.
Regards, Stuart
Reply
#3
Hi Tom

I contributed earlier to the thread about this photo from Duncan
As a prototype Cup it’s got a large number of features
Different from early production Cups.
I wonder how Mrs GE felt about being the riding mechanic?

My own Cup project is coming along nicely and is now fully alloy skinned
Which I suspect this car was, note the door edges( similar to Chummies?)
I’ve followed this door design with my car and also fitted
dual boot latches as per the early Cups.

Also planning to fit similar Lucas scuttle sidemarkers , but using them as
Front n indicators with orange bulbs.

I’d love to see more photos of this early GE car.

Regards

Bill G
Aka AllAlloyCup
Based near the Scottish Border,
Reply
#4
Bill, the car was definitely fabric bodied at Le Mans:

[Image: 158_04_01_18_4_29_19.jpeg]
Reply
#5
(10-01-2019, 05:24 PM)Mike Costigan Wrote: Bill, the car was definitely fabric bodied at Le Mans:

[Image: 158_04_01_18_4_29_19.jpeg]


Looks like Arthur Waite in car No 1, but what type of 7?
Reply
#6
Robin,It was Waite and Depper in a standard (50mph) Sports.
Reply
#7
Hi Mike

You’re probably right, but the scanning/screening artefact
Pattern on the photo reproduction just adds to the confusion!

Where the scuttle lamps are fitted looks like they’re compressing
A fabric underpinned with kapok scrim!

Regards

Bill G
Based near the Scottish Border,
Reply
#8
(10-01-2019, 02:13 PM)stuartu Wrote: Thanks for posting this Tom but, yes!
See post by Duncan titled ATF on 27/12/18 for the ensuing discussion.
Regards, Stuart


Ah yes, i thought it must be a post about automatic transmission fluid so I didn't bother to look it. It makes a bit more sense now! It doesn't help that I quite often browse on my iPhone without logging in so I can't see the pictures.
The ATF is very good, perhaps there should be a twinning committee!

(10-01-2019, 03:19 PM)AllAlloyCup Wrote: Hi Tom

I contributed earlier to the thread about this photo from Duncan
As a prototype Cup it’s got a large number of features
Different from early production Cups.
I wonder how Mrs GE felt about being the riding mechanic?

My own Cup project is coming along nicely and is now fully alloy skinned
Which I suspect this car was, note the door edges( similar to Chummies?)
I’ve followed this door design with my car and also fitted
dual boot latches as per the early Cups.

Also planning to fit similar Lucas scuttle sidemarkers , but using them as
Front n indicators with orange bulbs.

I’d love to see more photos of this early GE car.

Regards

Bill G
Aka AllAlloyCup
Glad to hear that, well done. We should have a Cup convention some time, although I think that geography could be a problem!
Mine is booked at the panelbeater for some new wings. I'm also lowering the seat base with a flat section at the back and a small transmission hump to clear the torque tube and stop me sliding around on corners!
Reply
#9
Tom,

I was discussing the fact that there are around 9 Cup Models in Scotland just now with Tom A. this afternoon - I would like to see if they can all be mustered at the Guildtown Rally this year - more distance for you but I came to France "last year" so maybe your turn! Angel Angel
Reply
#10
(10-01-2019, 06:31 PM)Mike Costigan Wrote: Robin,It was Waite and Depper in a standard (50mph) Sports.

so is that with a factory mod of central external fuel filler, or were they all there??
Presumably the lower front metalwork is just addition for aerodynamics, or.. ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)