08-05-2021, 01:33 PM
(08-05-2021, 11:38 AM)“john williams Wrote: It is also important to set the ignition timing before actually removing the dynamo. With distributor cap removed,turn engine until rotor arm points to number one cylinder plug lead position and "C B" points are fully open. Remove dynamo without altering crankshaft position. When replacing dynamo. position drive gears so that rotor arm aligns with cylinder 1 position.
Plus one for Johns comment. However, you will still need to make final adjustments to the timing. Nothing ever goes back quite the way it came apart!