07-05-2020, 12:35 PM
Wanted, a Radius Arm Chassis Ball as fitted to the Front Cross Member. New ones were available at one time but seem to be out of stock currently.
Steve Jones
Steve Jones
Radius Arm Chassis Ball
|
07-05-2020, 12:35 PM
Wanted, a Radius Arm Chassis Ball as fitted to the Front Cross Member. New ones were available at one time but seem to be out of stock currently.
Steve Jones
07-05-2020, 01:09 PM
I can help. I am sending a PM.
Robert Leigh
07-05-2020, 07:13 PM
I reacted in haste, and when I found the ball it was a rear one, so if anyone else can help it is still needed. Sorry for any confusion.
Robert Leigh
07-05-2020, 10:51 PM
08-05-2020, 08:28 AM
(This post was last modified: 08-05-2020, 02:38 PM by Steve Jones.)
Many thanks but that appears to be one for the rear crossmember. The front ball has a hole cross bored through the middle to take the radius arm fixing (waisted) bolt. If, however, it's just that the photo is such that it simply doesn't show the hole then I'm more than interested.
Steve
09-05-2020, 11:01 PM
10-05-2020, 11:32 AM
(This post was last modified: 10-05-2020, 12:12 PM by Nick Lettington.)
99% sureĀ I have one Steve. Send me a PM if you are still looking
20200510_121010.jpg (Size: 328.23 KB / Downloads: 117)
23-05-2020, 01:47 PM
Looking for radius arm ball and a torque tube ball if there are any half decent ones spare?
23-05-2020, 04:35 PM
I have sent a PM.
|
« Next Oldest | Next Newest »
|