Radius Arm Chassis Ball - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Sales & Wants (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=9) +--- Forum: Wants (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=11) +--- Thread: Radius Arm Chassis Ball (/showthread.php?tid=4332) |
Radius Arm Chassis Ball - Steve Jones - 07-05-2020 Wanted, a Radius Arm Chassis Ball as fitted to the Front Cross Member. New ones were available at one time but seem to be out of stock currently. Steve Jones RE: Radius Arm Chassis Ball - Robert Leigh - 07-05-2020 I can help. I am sending a PM. Robert Leigh RE: Radius Arm Chassis Ball - Robert Leigh - 07-05-2020 I reacted in haste, and when I found the ball it was a rear one, so if anyone else can help it is still needed. Sorry for any confusion. Robert Leigh RE: Radius Arm Chassis Ball - Parazine - 07-05-2020 This one any good? Not sure if it's a vintage one or later, is there any difference? RE: Radius Arm Chassis Ball - Steve Jones - 08-05-2020 Many thanks but that appears to be one for the rear crossmember. The front ball has a hole cross bored through the middle to take the radius arm fixing (waisted) bolt. If, however, it's just that the photo is such that it simply doesn't show the hole then I'm more than interested. Steve RE: Radius Arm Chassis Ball - Parazine - 09-05-2020 Here's the photo's: RE: Radius Arm Chassis Ball - Nick Lettington - 10-05-2020 99% sureĀ I have one Steve. Send me a PM if you are still looking 20200510_121010.jpg (Size: 328.23 KB / Downloads: 117) RE: Radius Arm Chassis Ball - mhacche - 23-05-2020 Looking for radius arm ball and a torque tube ball if there are any half decent ones spare? RE: Radius Arm Chassis Ball - Robert Leigh - 23-05-2020 I have sent a PM. |