13-11-2020, 09:17 AM
Hi Bob
These shafts are Regent shafts and were retrieved from an axle that was being used in a small home made luggage trailer. I think the damage was done before the conversion as there were no keys present and the hub nuts were just finger tight and held on by the ubiquitous rusty nails in lieu of split pins.
Cheers
Howard
These shafts are Regent shafts and were retrieved from an axle that was being used in a small home made luggage trailer. I think the damage was done before the conversion as there were no keys present and the hub nuts were just finger tight and held on by the ubiquitous rusty nails in lieu of split pins.
Cheers
Howard