21-02-2019, 05:10 PM
(This post was last modified: 21-02-2019, 05:19 PM by Dave Wortley.)
Another lovely day here so had to go out to Tinker Bottom again! Been suffering from Austin 7 withdrawal symptoms lately.
Mark,
Meant to ask you the other day. you have a straight axle beam and a flat spring on your special which gives only a small amount of beam movement before it hits the centre of the spring. does it work OK? I had this on a special I have recently finished and had to put a 10mm rubber block mounted between the spring u bolts. Eventually I fitted a slightly more cambered spring which works more satisfactorily.
Mark,
Meant to ask you the other day. you have a straight axle beam and a flat spring on your special which gives only a small amount of beam movement before it hits the centre of the spring. does it work OK? I had this on a special I have recently finished and had to put a 10mm rubber block mounted between the spring u bolts. Eventually I fitted a slightly more cambered spring which works more satisfactorily.