27-12-2022, 04:02 PM
Graham, will the remaining threads clean up with a thread file ? I think you have made the mistake I did first time I tried to remove my rear hubs. Once the hub is on well and the centre bolt has been tightened but the hub will still be tight on the shaft hit the centre bolt with a heavy hammer and the shock will release the hub from the taper complete with hub puller. If the threads as shot the hub puller can be held in place with some tack welds which can be ground off once the hum is off.
John Mason.
John Mason.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.