03-02-2018, 09:34 PM
(01-02-2018, 08:18 PM)Pearls not a Singer Wrote: I'm starting to re-assemble my RP after a major rebuild.
The petrol tank was original suspended from u-clips (similar to leaf spring clips) which are much smaller than the holes in the brackets being barely thicker than wheel spokes. I have doubts that these are original and given the weight of a full tank of fuel, I'm concerned that these are not up to the job and will give way at an inconvenient moment.
The brackets and clips are not illustrated in the parts book, presumably because they are considered part of the body?
Reminiscences happy or otherwise from anybody who has successfully installed a tank will be welcome
Thanks
The tank does indeed hang very successfully on those two thin u bolts. Had mine out several times, never any trouble.
I could suggest to you that the tank has a good clean out whilst it is out of the car. My tank man took the end off mine and cleaned it very carefully and put the end back on.