The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is my engine dead ?
#1
Been out for a run in Ruby today, started to get a very metallic knocking noise, when starting to slow down the engine cut out. Managed to get her going but only working on 1/4 throttle and above. Manage to drive her home blue smoke pouring out , and a trickle of oil. 
We are in Devon is there a specialist that could repair her nearby? EX22 area .
Nick
Reply
#2
That sounds like one or two stuck valves to me, which aren’t difficult to sort out if you are a competent diy mechanic. I’ve just done three and it took me about four hours, start to finish.

If you can’t manage the job yourself I would ask one of the Devon club members for a recommendation.
Reply
#3
Try Tim Whellock.
TA36QP
01460 66434
Very knowledgeable.
Reply
#4
Look on the Devon Austin Seven website for contact details and information www.devonsevens.co.uk or our Facebook page. Personally, I would recommend Tim Whellock or Exeter Engineering (nearer) but there may be someone closer to you.
Reply
#5
What a fool I am, I had put 3 gallons of evil diesel into her by mistake. I realised the next morning, and have now drained the tank flushed through some petrol and she runs like a dream. Can't believe that it drove home 5 miles mostly running on D.

thanx for your help Nick
Reply
#6
Quite easily done and in the end a good result!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)