| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
|
|
CW & P ratios
|
02-03-2022, 12:32 PM
A 1/16" wall thickness steel sleeve Loctited (or shrunk) onto the pinion will allow you to use the late style roller bearing. The bearing in this position on the pinion is only taking radial load, so a roller bearing is always going to be far superior to a ball race for this job.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
CW & P ratios - by Nick Mayne - 20-02-2022, 03:49 PM
RE: CW & P ratios - by Jack in the Box - 20-02-2022, 04:31 PM
RE: CW & P ratios - by Parazine - 20-02-2022, 05:08 PM
RE: CW & P ratios - by JonE - 20-02-2022, 08:42 PM
RE: CW & P ratios - by Nick Mayne - 20-02-2022, 09:17 PM
RE: CW & P ratios - by dickie65 - 20-02-2022, 09:54 PM
RE: CW & P ratios - by Bob Culver - 20-02-2022, 11:17 PM
RE: CW & P ratios - by Parazine - 21-02-2022, 10:29 AM
RE: CW & P ratios - by Nick Mayne - 21-02-2022, 01:15 PM
RE: CW & P ratios - by Parazine - 22-02-2022, 12:46 AM
RE: CW & P ratios - by Nick Mayne - 22-02-2022, 12:52 AM
RE: CW & P ratios - by Bob Culver - 22-02-2022, 04:52 AM
RE: CW & P ratios - by Nick Mayne - 24-02-2022, 05:19 PM
RE: CW & P ratios - by andrew34ruby - 24-02-2022, 05:38 PM
RE: CW & P ratios - by Parazine - 24-02-2022, 06:53 PM
RE: CW & P ratios - by Tony Press - 24-02-2022, 10:38 PM
RE: CW & P ratios - by Nick Mayne - 01-03-2022, 10:48 PM
RE: CW & P ratios - by Bob Culver - 01-03-2022, 11:40 PM
RE: CW & P ratios - by Parazine - 02-03-2022, 12:10 AM
RE: CW & P ratios - by Stuart Giles - 02-03-2022, 12:32 PM
RE: CW & P ratios - by dickie65 - 02-03-2022, 06:51 PM
|
