The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rist Horn on 12 Volts
#1
Do I need a resistor in series to run a 6V Rist horn on 12 Volts? If so can anyone recommend an Ohm value and even a specific item?
Reply
#2
I run my six volt klaxon on twelve volts. works well and scares the bejesus out of those who offend me.

I run my six volt klaxon on twelve volts. works well and scares the bejesus out of those who offend me.
Reply
#3
My 6v Rist horn has been on 12v for the last 18 years.
Reply
#4
Thank you both that is re-assuring so I need to do nothing and that is a change!
Reply
#5
Can I ask a question just out of curiosity. Does running a 6 volt horn on 12 volts change the tone or its volume.

John Mason.
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.
Reply
#6
Will raise  tone/pitch and volume. Possibly eyebrows as well.
Reply
#7
Whilst the Benjamin horn sounds OK on 12 volts the Rist horn was a bit too shrill for a Seven so I used a spare dynamo field resistor to drop the voltage to give a more acceptable tone.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)