23-12-2021, 02:56 PM
Hi All
Thanks for all the input and private messages.
I put two caps through the ultrasound cleaner and this morning I’ve spent a half hour polishing one with T cut. Here is the result.
57442BBD-51D0-468C-A1FE-85994B6DC2CE.jpeg (Size: 85.53 KB / Downloads: 267)
The T cut one on the left is more than acceptable as it is, but I may give it a spray with WD40 as Andrew suggests.
I’ll have to wait until New Year to test the cap as I need points and condenser from the Cherished suppliers to complete the job.
Jon…The need to clean up the caps was partly cosmetic but I also wanted to check for cracks and tracking marks. Both these caps were really manky when I started.
Cheers
Howard
Thanks for all the input and private messages.
I put two caps through the ultrasound cleaner and this morning I’ve spent a half hour polishing one with T cut. Here is the result.
57442BBD-51D0-468C-A1FE-85994B6DC2CE.jpeg (Size: 85.53 KB / Downloads: 267)
The T cut one on the left is more than acceptable as it is, but I may give it a spray with WD40 as Andrew suggests.
I’ll have to wait until New Year to test the cap as I need points and condenser from the Cherished suppliers to complete the job.
Jon…The need to clean up the caps was partly cosmetic but I also wanted to check for cracks and tracking marks. Both these caps were really manky when I started.
Cheers
Howard