17-11-2021, 10:07 AM
Have a walk to the Great Western Society Depot - I an sure that one of their members in the Locomotive Dept will teach you how to do the job - scraping in W/M bearings is part of their bread & butter.
One thought - have you assembled the bearings and checked that the bores are round? If the bearings have been remettled you may find that the butts have closed in and will need to be spread - they will show you how to do this as well.
One thought - have you assembled the bearings and checked that the bores are round? If the bearings have been remettled you may find that the butts have closed in and will need to be spread - they will show you how to do this as well.