06-10-2021, 09:44 PM
(This post was last modified: 06-10-2021, 09:48 PM by Jack in the Box.)
David,
This was the arrangement on our AD when we acquired it. It is certainly easier to fill the float chamber for cold starting than our Box, that does not have this feature.
There will be slightly higher mass as you say, so maybe the fuel level in the carb is slightly different too.
Alan
Dave,
Please accept my apologies if I have used the incorrect designation. The carb is bronze, so should I have called the thread “22 FZ again” ?
Do you know what the shield is for?
Cheers Alan
This was the arrangement on our AD when we acquired it. It is certainly easier to fill the float chamber for cold starting than our Box, that does not have this feature.
There will be slightly higher mass as you say, so maybe the fuel level in the carb is slightly different too.
Alan
Dave,
Please accept my apologies if I have used the incorrect designation. The carb is bronze, so should I have called the thread “22 FZ again” ?
Do you know what the shield is for?
Cheers Alan