07-05-2021, 09:45 AM
I *think* that drive in 3rd is achieved by running small gears with external teeth in mesh with larger gears with internal teeth, which would have to be offset otherwise they would lock solid or not mesh at all.
It looks rather expensive to produce so my guess is it never saw the light of day.
It may be just a concept drawing, perhaps in support of the patent application; but if so, curious that it has surfaced via the Service Dept.
It looks rather expensive to produce so my guess is it never saw the light of day.
It may be just a concept drawing, perhaps in support of the patent application; but if so, curious that it has surfaced via the Service Dept.