16-04-2021, 02:52 PM
Sorry Jamie I missed your reply. pm me your e-mail address and I'll send you a scan of the article.
Yes, definitely check all is free when tightened up. If the block's not in place check again with that bolted on as it can heave things out of line.
An old-school bit of advice is to get the bearing bolts 'hand tight' and give the housing a gentle tap or two with a ball pein hammer to pop it into line.
Yes, definitely check all is free when tightened up. If the block's not in place check again with that bolted on as it can heave things out of line.
An old-school bit of advice is to get the bearing bolts 'hand tight' and give the housing a gentle tap or two with a ball pein hammer to pop it into line.