17-03-2021, 10:48 AM
HI Jon,
The short Answer is No unless you weld the liner top and bottom,
You have to remember that the liner is pressed in to give a Guaranteed thickness for the piston to operate in and bring the bore back to standard, and will not provide any strength for the Block.
Hope that makes sense
Colin NZ
The short Answer is No unless you weld the liner top and bottom,
You have to remember that the liner is pressed in to give a Guaranteed thickness for the piston to operate in and bring the bore back to standard, and will not provide any strength for the Block.
Hope that makes sense
Colin NZ