21-12-2017, 07:46 PM
(20-12-2017, 09:55 PM)Ruairidh Dunford Wrote: Hi Colin,Ruairidh,
this is the 6v prototype - due to go into production in January and yes, so far it appears to be a very good item.
I recently purchased a Dynamator, my”Barn find RP” had few electrical components so it was more cost effective to do it this way, I will use conventional 12 volt bulbs etc.
It is my intention to connect the B terminal via the ammeter to the battery, there is no cutout/regulator fitted, the D terminal connects directly to the Plc Switch.
It has been suggested that I should put a fuse in the main feed to the battery. Is this a good idea and what effect will it have on the Dynamator if a fault causes an open circuit?
I will still use a fuse on the auxiliary circuits.
Roger
Location:- Haverfordwest, Pembrokeshire.