24-02-2021, 03:54 PM
I use a 2 post one and lift from between the wheels under the chassis cross rails, it's a neat fit. You can also dump an 8 x 4 sheet of ply on it for an adjustable height bench when you're short of clear space. I once lifted the austin onto the back of my then Ford F100 to take it to a distant rally (1500miles),
Mine has the lifting cables running across the floor between the posts and the resulting bump is a pain to sweep around, There are some models that the cables go across a gantry overhead leaving the floor clear. They tend to be quite tall and would not have fitted my shed. An indispensable addition to your workshop.
Mine has the lifting cables running across the floor between the posts and the resulting bump is a pain to sweep around, There are some models that the cables go across a gantry overhead leaving the floor clear. They tend to be quite tall and would not have fitted my shed. An indispensable addition to your workshop.