King pin reamer

[Colin Wilks]

I am wanting to buy an Austin 1/2" king pin reamer, with the undersized pilot at one end. 
If anyone has one surplus to requirements I'd be most interested.
Many thanks,
Colin

[Ruairidh Dunford]

See here Colin: https://www.theaustinsevenworkshop.com/p...pin-reamer

[Colin Wilks]

Hi Ruairidh
None of the usual suspects have any in stock, Seven Workshop, David Cochrane and Tony Betts are all out.

[Rick F]

I bought a good and reasonably priced expanding king-pin reamer from Traceys Tools  - first class return-of-post service

[squeak]

I have a set of adjustable reamers, and they come with a set of screw on pilot extensions. These have a sliding cone centering device and are designed for line reaming king pins. The cone may need shortening to fit between the bushes on a seven. Not tried this myself as I have an Austin one.  Worth asking Tracys if they can supply pilots as well.

[Zetomagneto]

I bought a long 1/2” reamer from Tracy Tools

[Colin Wilks]

Thanks for all your replies. I shall investigate.

Update:

I discussed this with Drill Service
https://www.drill-service.co.uk/products...ith-pilot/
but concluded there wouldn't be room to install the pilot.

I have bought a long parallel reamer from Tracy Tools, although all they have is on a MT1 taper.

Incidentally, Tracy Tools have stock of the 1 3/8 x 16tpi die to refresh outer hub threads - £25.