28-12-2020, 08:59 PM
Hi Tom,
Are running splash or pressure fed engine ?
My Engine is pressure fed.
I have soldered up the oil groove in my front cam bearing and fitted a restrictor in the oil gallery which is just a bit of brass with a 1/16 hole in it.
The bearing has also had the O ring mod done to it.
I would not mod then cam bearing oil feed on a splash fed engine though.
If you are running a splash fed engine an overbored oil pump will help make sure enough oil gets around
Are running splash or pressure fed engine ?
My Engine is pressure fed.
I have soldered up the oil groove in my front cam bearing and fitted a restrictor in the oil gallery which is just a bit of brass with a 1/16 hole in it.
The bearing has also had the O ring mod done to it.
I would not mod then cam bearing oil feed on a splash fed engine though.
If you are running a splash fed engine an overbored oil pump will help make sure enough oil gets around