23-12-2020, 01:33 PM
(This post was last modified: 23-12-2020, 02:19 PM by Peter Sweeney.)
SAM_2615 (2).JPG (Size: 179.79 KB / Downloads: 428) Rebuilding a spare front axle. I am asking if anyone knows what thread the cross tube and rod ends have. They look like a pipe thread. I have a new set I bought in the 70s at Beaulieu for a fiver just in case. The tube is not handed but one of the ends only screws in about 1/2" I think its been slightly crushed and want to open it out. Any thoughts.
PS. Forgot to say the tube is 3/4". Pete