14-12-2017, 06:29 PM
Thanks Tom
I’ll get some 3/4” timber , for cutting
On the grain if possible,
and make the flat metal bits first.
I cut the long curved body side Ash members
Out of a plank whose grain matched the required shape exactly!!
Ps ( email also sent)
Many thanks for all your patience and
kindnesses to the all the plucky Cup builders
Out there.
Kind regards
Bill G
I’ll get some 3/4” timber , for cutting
On the grain if possible,
and make the flat metal bits first.
I cut the long curved body side Ash members
Out of a plank whose grain matched the required shape exactly!!
Ps ( email also sent)
Many thanks for all your patience and
kindnesses to the all the plucky Cup builders
Out there.
Kind regards
Bill G
Based near the Scottish Border,