22-09-2020, 10:00 PM
(This post was last modified: 22-09-2020, 10:06 PM by Zetomagneto.)
No need to bend the tags at both ends if you can remove the brass hinge rod first then the hinge sections can be slid away. They may be stuck by old paint but there is no physical fixing so just patience needed.
If your tags are good at both ends just removing the rod will enable you to replace the threaded fixing.
I would try to avoid bending the tags if at all possible
If your tags are good at both ends just removing the rod will enable you to replace the threaded fixing.
I would try to avoid bending the tags if at all possible