13-04-2023, 11:25 AM
With a load of bodywork jobs coming up I've been forced to 'up my game' with the MIG welder.
Grinding off rock-hard weld beads is a real chore as many here will know.
A chat last year with an abrasives supplier yielded a pack of 3M Cubitron grinding discs, which I have only now got around to trying.
They are not inexpensive - set me back about £50 if I recall correctly - but boy, are they worth it!
They slice through MIG as if it were cheddar cheese, and I have yet to wear out my first disc when normally I'd have expected to replace 2 or 3 times.
Thoroughly recommended!
Grinding off rock-hard weld beads is a real chore as many here will know.
A chat last year with an abrasives supplier yielded a pack of 3M Cubitron grinding discs, which I have only now got around to trying.
They are not inexpensive - set me back about £50 if I recall correctly - but boy, are they worth it!
They slice through MIG as if it were cheddar cheese, and I have yet to wear out my first disc when normally I'd have expected to replace 2 or 3 times.
Thoroughly recommended!