30-07-2020, 09:17 PM
Jon,
There is a stepped bush made of paxolin, or similar, pressed into the inner stator tube. Thro' a hole in the bush a wire to the horn is pushed through with a nipple soldered on. A short spring prevents the button touching the nipple until pressed, so completing the circuit. Horn buttons of this type are difficult to find.
There is a stepped bush made of paxolin, or similar, pressed into the inner stator tube. Thro' a hole in the bush a wire to the horn is pushed through with a nipple soldered on. A short spring prevents the button touching the nipple until pressed, so completing the circuit. Horn buttons of this type are difficult to find.