17-01-2018, 11:30 PM
(17-01-2018, 11:04 PM)David Cochrane Wrote: Thanks for your reply - did you have to drill holes in the door? And what sort of bolts/screws did you use?
Yes David, you will need to drill the door. a bit of masking tape on the surface first will help to stop the drill from slipping. Willie supplies the screws and the rubber washer to go under the mirror arm. The drill is about 3m/m.
The best thing is to ere on the safe side and go smaller then open up to suit. (you could do a dummy run on a piece of scrap.)
SMILEY.