09-02-2020, 05:59 AM
(This post was last modified: 09-02-2020, 06:58 AM by Bob Culver.)
This was covered extensively not long ago if anyone can provide the reference. Should be just a moderate press fit but may have been Loctited..... Brute force may move or separate the race but cruel on such an expensive item. Presumably have moved as far as poss with the adjuster ring. Heating the case and moderate bumping on either axle in the appropriate direction should suffice.
Found reference. August 2017, Ruby Half Shafts. Depending on what is intended and why, there is an argument for not altering the remaining adjuster as it determines the mesh as is.
Found reference. August 2017, Ruby Half Shafts. Depending on what is intended and why, there is an argument for not altering the remaining adjuster as it determines the mesh as is.