| The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
|
Fitting new 5.25 Cw & P to a banjo axle
|
Fitting new 5.25 Cw & P to a banjo axle
|
24-10-2019, 06:45 PM
(This post was last modified: 24-10-2019, 06:48 PM by Stuart Giles.)
Flanged torque tube banjo, which would have had a 1" pinion from the factory. The 1 1/8" pinion also fits but needs to go in with the late style roller bearing and the correct later style spacer for the roller race axle.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Fitting new 5.25 Cw & P to a banjo axle - by Dave Mann - 24-10-2019, 10:07 AM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Stuart Giles - 24-10-2019, 01:31 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Steve Jones - 24-10-2019, 01:53 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Rick F - 24-10-2019, 02:30 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Chris KC - 24-10-2019, 02:58 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Stuart Giles - 24-10-2019, 06:45 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Terrytuned - 24-10-2019, 07:44 PM
RE: Fitting new 5.25 Cw & P to a banjo axle - by Dave Mann - 24-10-2019, 08:17 PM
|
