03-11-2019, 07:33 PM
(This post was last modified: 03-11-2019, 08:37 PM by Ian McGowan.)
Hi Joe, do you mean below the MAIN JET and the COMPENSATING JET? If so, it appears that these are not shown on the exploded diagram of the data sheet but, referred to as the last 2 items on the SPARE PARTS SCHEDULE of the data sheet as "restriction tubes".
I have to say that in my admittedly limited experience with 26 VA carbs, I have never encountered these items. I would be tempted to remove them both and see how you go.
The only application that I have seen these restriction tubes specified for is fitted under the Comp. jet on 16U carbs on 1944 Petter 1.5hp and 2hp engines.
I have to say that in my admittedly limited experience with 26 VA carbs, I have never encountered these items. I would be tempted to remove them both and see how you go.
The only application that I have seen these restriction tubes specified for is fitted under the Comp. jet on 16U carbs on 1944 Petter 1.5hp and 2hp engines.