19-10-2017, 07:29 PM
Like Parazine I put the clutch release bearing on to hold the levers in place.
I then put two elastic bands stretched over the bell housing studs to hold it in place. You then put the engine in and once engaged in the gearbox and bellhousing studs so you can put one or two nuts on, you then snap the elastic bands and engage everything fully.
I then put two elastic bands stretched over the bell housing studs to hold it in place. You then put the engine in and once engaged in the gearbox and bellhousing studs so you can put one or two nuts on, you then snap the elastic bands and engage everything fully.