18-10-2019, 09:28 AM
(This post was last modified: 18-10-2019, 09:28 AM by Bob Culver.)
For decade my RP had a tiny hole in the radiator cap. On "heavy" braking a tiny jet of rusty steaming water woud go over the roof! So a lot must go out the overflow. With a Ruby is it practicable to fit a pressure cap?
A simple semi open tin (no plastic please) catches fluid which can be poured back in. Very desirable when using expensive anti corrosive It is tempting to close up the overflow. Been done on mine at some stage. So on pressure test the radiator resembles an Alchazelsor tablet.
A simple semi open tin (no plastic please) catches fluid which can be poured back in. Very desirable when using expensive anti corrosive It is tempting to close up the overflow. Been done on mine at some stage. So on pressure test the radiator resembles an Alchazelsor tablet.