12-10-2019, 09:05 AM
Assuming all is straight and tight and lovely, there's something you can try.
With the car on level ground, slacken each of the radius arm/axle nuts, then with a wrench twist each radius arm outwards a bit, and retighten the nuts. That will give you more caster, and maybe enough. If not, repeat, twisting a bit further.
With the car on level ground, slacken each of the radius arm/axle nuts, then with a wrench twist each radius arm outwards a bit, and retighten the nuts. That will give you more caster, and maybe enough. If not, repeat, twisting a bit further.