03-10-2019, 04:05 PM
Thanks for the reply, In a mad moment I bought the block complete & fitted with the valves & pistons about 6 years ago from eBay (yes I know a moment of foolish red mist) and when I had my engine overhauled 3 years ago I had it fitted, Other than the sports block with larger inlet valves and a HC head the engine is a standard 2 -bearing with a 26va carb.
I'm thinking of fitting a LC head when I have finished the decoke and if you think it wouldn't be detrimental to the running I could just put back the large single spring using the same collets and retainer. But, would the single spring from the double set be as good "normal" single springs?
I'm thinking of fitting a LC head when I have finished the decoke and if you think it wouldn't be detrimental to the running I could just put back the large single spring using the same collets and retainer. But, would the single spring from the double set be as good "normal" single springs?