25-09-2019, 09:58 PM
HI Spex,
As Zeto has said a jig on a lathe much easily used as you need access to both sides of rod for doing side clearance and radius,
as you need to be able to perform all operations with out having to move the rod once set up.
Cheers
ColinĀ
NZ
As Zeto has said a jig on a lathe much easily used as you need access to both sides of rod for doing side clearance and radius,
as you need to be able to perform all operations with out having to move the rod once set up.
Cheers
ColinĀ
NZ