16-09-2019, 01:27 PM
Hi Tony,
A long time ago when I had a set of 1 5/16th rods converted to shells they use Ford SV 1172 bearings I seem to remember. They "nicked" the big end bolts but that was solved by using three bearing big end bolts. Don't know if they are still in production, but might be worth looking into>
A long time ago when I had a set of 1 5/16th rods converted to shells they use Ford SV 1172 bearings I seem to remember. They "nicked" the big end bolts but that was solved by using three bearing big end bolts. Don't know if they are still in production, but might be worth looking into>