21-09-2019, 07:20 PM
(This post was last modified: 21-09-2019, 07:22 PM by Zetomagneto.)
There is no way the key can get out without taking the gear off, either the key is not from the crank gear, or it fell out when the gear was last fitted to the crank (unlikely, but possible).
Does the gear turn relative to the crank?
Big washer shouldn't be there which would suggest the starter dog didn't screw fully home, and was bodged using the washer, when you get a new starter dog make sure it screws in fully and freely.
Obviously been some poor quality work been carried out in that area in the past.
Does the gear turn relative to the crank?
Big washer shouldn't be there which would suggest the starter dog didn't screw fully home, and was bodged using the washer, when you get a new starter dog make sure it screws in fully and freely.
Obviously been some poor quality work been carried out in that area in the past.