10-10-2019, 08:09 AM
(This post was last modified: 10-10-2019, 09:48 AM by Bob Culver.)
Hi all
Is there any consesus as to the best side to lock when this mod adopted?
It is a bit surprising that the thin metal of the s.a blade ends and the "centre bearing" survive long term use.
For the rubber block solution no one has ever published a diagram of an ideally shaped piece to reduce experiment. Old gumboots and some shoes can provide a large piece of rubber or similar.
I cannot quite envisage how the "half link" is arranged. Just locking the eye over the axle stud would seem to suffice.
Is there any consesus as to the best side to lock when this mod adopted?
It is a bit surprising that the thin metal of the s.a blade ends and the "centre bearing" survive long term use.
For the rubber block solution no one has ever published a diagram of an ideally shaped piece to reduce experiment. Old gumboots and some shoes can provide a large piece of rubber or similar.
I cannot quite envisage how the "half link" is arranged. Just locking the eye over the axle stud would seem to suffice.