07-10-2019, 10:52 AM
When I built my 1938 Ruby special I used the piece in the 750 special builders guide to make a front twin shock absorber. I used the springs from spare rear shocks and the back plates. The threads on these are bicycle threads the same as bike hub spinners. I used these to be able to adjust the pressure on the shocks. Having only standard friction discs I used washers to keep the discs in place. The standard shockers bracket was used and discs and spacer were cut from 1/4" plate. and welded together. The outer ends are onto 3/8 studs in the ends of the radius arm. I hope the photo comes with this if not I will send it on its own.