10-09-2019, 05:54 PM
Before you start shelling out for what is a nice but expensive accessory, try fixing one end of the standard shocker direct to the axle beam - just undo the alloy link and use it as a spacer leaving the other end hidden inside the two damper arms. It will then act as a kind of Panhard rod to better locate the front axle.
Failing that you could try the tyre rubber bodge between the axle beam and the spring shackles.
Either solution costs nowt or nearly and stops the axle from shoogling (a Scottish term) about under cornering.
Try it.
Failing that you could try the tyre rubber bodge between the axle beam and the spring shackles.
Either solution costs nowt or nearly and stops the axle from shoogling (a Scottish term) about under cornering.
Try it.