15-10-2020, 02:21 PM
Bob - first start - I think its still got a manifold leak somewhere presently! But it ticks over very low. I thought it sounded quite purposeful on the road. I did a bit of porting when it all got cleaned up. I'm thinking it just needs a bit of carbon buildup in side the new exhaust sections too.
Ruairidh - the 2 old rear windows would have been separate panes enclosed in ash, with hinge on each rear pillar. Above the tailgate. At present there is nothing at all so rear view unencumbered by anything. The roof top (or lack of it) doesn't really affect the rear view? I really wanted to avoid a drip rail as it hides all the curves of the woodwork.. one option could be polycarbonate panels which are removeable all the way round. But not for the doors.
Or just drive faster.
Ruairidh - the 2 old rear windows would have been separate panes enclosed in ash, with hinge on each rear pillar. Above the tailgate. At present there is nothing at all so rear view unencumbered by anything. The roof top (or lack of it) doesn't really affect the rear view? I really wanted to avoid a drip rail as it hides all the curves of the woodwork.. one option could be polycarbonate panels which are removeable all the way round. But not for the doors.
Or just drive faster.